Fuckboy repellent 3" / 7.62cm wide uvdtf single sticker (#65)
Fuckboy repellent 3" / 7.62cm wide uvdtf single sticker (#65)
More information - 3" wide UVDTF Decals
More information - 3" wide UVDTF Decals
This listing is for 1 x 3"/ 7.62cm wide UVDTF sticker (Cup not included)
Please note, any designs that are longer in height will be a max of 4" / 10.16cm high and may be less than 3" / 7.62cm wide to ensure the design does not exceed 4" / 10.16cm high.
For information on how to apply or care for your Decal, please read the drop down instructions below.
What is UVDTF?
What is UVDTF?
What is UVDTF?
Ultraviolet (UV) DTF Printing refers to a new printing method that uses ultraviolet curing technology to create designs on films. These designs can then be transferred onto hard and irregular-shaped objects by pressing down with fingers and then peeling off the film.
Does UVDTF use different inks to sublimation or DTF??
UV printing, uses special inks that are formulated to dry rapidly when exposed to ultraviolet (UV) light. When paper (or other substrate) passes through the press and receives wet ink, it is immediately exposed to ultraviolet light. As the UV will immediately dry the ink, so there is no chance of ink leakage or diffusion. As a result, the print details of the image and text are clearer.
What would I use UVDTF on exactly??
UV DTF printing is particularly suitable for glasses and other hard substrates with smooth surface. They require no heat! Perfect for snowblobe tumbles, glass cups, tumblers and more! You may have a design that you want to cut using vinyl and it's several layers, well no need to cut, weed and layer, simply print them as a UVDTF and stick them on.
Dimensions
Dimensions
I print my 3" decals either 3" wide, or if a design is longer in length, they will be a max of 4" high. If this is the case, the initial 3" wide design may be less than 3" wide.
How do I apply?
How do I apply?
Application Instructions (please measure against your cup first!)
DO NOT USE ALCOHOL OR ANY SOLVENT TO PREP THE AREA!
1. Peel design transfer off of backing.
2. Place the transfer on the cup ensuring the design is straight and positioned correctly.
(The adhesive is very strong. Once the transfer touches the glass its impossible to take off)
3. Press the transfer down, working from the center outwards, pushing out any bubbles.
4. Rub all over the design with your fingers. The more rubbing the better.
5. Peel the clear film off and you're done!
Hand wash only. We do not advise to put in a dishwasher or microwave.
We are not responsible for application mishaps.
*Please note: Not all brands of 16 oz. glass cups have the exact same measurements. They can differ by a couple of millimetres. Our wraps have been measured to fit Libbey glasses we sell HERE, however Adjustments may be necessary*
Care Instructions
Care Instructions
Keep UVDTF in a cool dry space to ensure decals aren't damaged before use.
DO not use any alcohol or solvents to "prep" the cup before use.
Your customers can be advised to keep item away from water for 48hrs. They decals are NOT suitable for high heat, so avoid the Microwave, Dishwasher and leaving to soak in water. Wash in tepid water.