#8 - Yellow Motel Keyring
#8 - Yellow Motel Keyring
Dimensions
Dimensions
8" Wide (Max 12" high)
How do I apply?
How do I apply?
8" DTF Transfer that requires heat and pressure to adhere to garments.
DTF Hot Peel Transfer Instructions:
COTTON (HOT PEEL)
150-160 degrees celsius for 20 seconds with heavy pressure and peel hot.
Lay Teflon sheet over design and 2nd press 8 seconds
POLY (HOT PEEL)
130-140 degrees celsius for 15 seconds with heavy pressure and peel hot.
Lay Teflon sheet over design and 2nd press 8 seconds
Cricut, Cricut Mini and household iron (COLD PEEL)
160 degrees celsius for 20 seconds with heavy pressure and let cool completely before peeling.
Lay Teflon sheet over design and 2nd press 8 seconds.
These instructions are a guide as some heat presses give different results. Test transfers are provided for you with your first order, or order an additional Test transfer pack with your order first to find the best settings for your press.
Top Tip for transfers:
When peeling your first tester transfer, make sure your temp is 150-160 and ensure your pressure is set to heavy. It should take 2 hands to shut your press! Leave for 10-15 seconds and try peeling from one corner SLOWLY. If you notice some of the transfer is still on the transfer, put it back down and press again for another 5-7 seconds. Then try again. If it hasn't stuck down or is peeling away, put it back down and adust your pressure to a tighter pressure, and press again for 5-7 seconds. Then try again and repeat this process to find the perfect setting. Once it's worked, then get your second transfer and try again for 10-15 seconds at that pressure and adjust based on your heat press settings.
**ALL SALES ARE FINAL**